How To Fix Stop In Psmain With Error Code 0x5000

How To Fix Stop In Psmain With Error Code 0x5000

Affected hardware methods:HP EliteBook 2560p PC, HP EliteBook 2570p Notebook, HP EliteBook 8460p PC, HP EliteBook 8470p PC, HP EliteBook 8560p PC, HP EliteBook 8560w Notebook Mobile Workstation, HP EliteBook 8570p Notebook, HP EliteBook 8570w Notebook Mobile Workstation Station , HP EliteBook 8760w Mobile Workstation, HP EliteBook 8770w Mobile Workstation, HP EliteBook Folio 9470m Desktop, HP EliteBook Folio 9470m Ultrabook, HP ProBook 6460b Notebook PC, HP ProBook 6470b Notebook PC, HP ProBook 6560b Notebook PC, HP ProBook 6570b Notebook PC < / product group names>

HP Inc. assumes no responsibility for technical or editorial errors contained in this document, or for possible omissions; lost profit; losses associated with the acquisition of replacement solutions or services; or damage resulting from loss of data or restoration of software. The opinions contained in this document are subject to change without notice. HP Inc. all and referenced HP product names are trademarks of HP Inc. in the US and other countries. Other company product names and those mentioned herein are considered trademarks of their respective companies.Current owners.

Since you didn’t list a Check Point product in my question, I assume (based on all the errors) that it is Full Disk Encryption.

Typically, many errors are the result of hardware incompatibilities, which in some cases can be corrected by updating the BIOS or following certain boot steps.

In the worst case, you can mount the drive using the Dynamic Mount utility / and/or restore the data.

stop in psmain error code 0x5000

In any case, it is highly recommended to work in conjunction with who-tac should be effective in helping.

Symptoms

On some websites, Latitude, OptiPlex Precision, and some Dell system users are reporting that when installing their checkpoint encryption software, the system displays a black screen and a blue screen with a password. PSMAIN error 0x5001498.>

Reason

This problem only occurs if the operating mode is specifically sata set to ATA.

Resolution

Change the SATA mode to ensure the system boots correctly, then updateBIOS. Updating most of your system’s BIOS features should resolve this issue. To update your BIOS to the latest version, follow the instructions below

Note. Before updating the computer’s BIOS, make sure the power supply is at least 10% charged and connect the AC adapter.

stop in psmain error code 0x5000

A warning:
Never turn off the computer or disconnect the AC adapter as you may update the BIOS/firmware or damage the computer. While one person is performing the update, their computer will restart and everyone will briefly see the screen.
Disconnect all external devices connected to your computer.
Save all open files or documents before updating the BIOS.

  1. Go to the Dell support site.
  2. Product

  3. Select Dell using one of the following methods.
    1. Click Explore Product. This will install Dell Application system Detection on your computer, which in turn will automatically identify your Dell computer.
    2. Sign in to the Tag Key Service or Express Service to encode your Dell computer and click Submit’.
    3. Click Browse Products and manually select your computer from the list of Dell options.
    4. On the

    product support page, click the Drivers and Downloads tab in the dropdown area.

  4. On the right bank, make sure the correct Windows operating system is selected. If not, click Change and select the optimal operating system installed on your Dell computer.
  5. In the list of BIOS driver categories, click to expand the menu.
  6. file The latest BIOS update can be found in the list. Click on “Download File” to start downloading the file so you can download it to your computer.
  7. While the invitation is loading, click Save.
  8. Access where Location file was loaded.
  9. Right-click the downloaded BIOS update executable and select Run as administrator.
  10. If you see the awesome UAC Simple Account Control prompt, click Yes.
  11. In the BIOS update window, click Yes.
  12. Follow the instructions on the screen to complete the BIOS update. D You may need to restart your computer several times to complete the BIOS update.


Previous post Passaggi Per Correggere Un Errore I/O Del Buffer Nell’SDB Del Blocco Logico Del Dispositivo
Next post Schritte Zum Korrigieren Eines Puffer-E/A-Fehlers In Allen Device Logical Block SDB