Help Fix Ibm Ps/2 Error 162

Help Fix Ibm Ps/2 Error 162

In this guide, we are going to uncover some of the possible causes that might cause the ibm ps/2 162 error and after that, we will offer you possible solutions that you can try to solve this problem. PS/2 displays error message 162 after booting the hard drive. Please help isolate the problem: This problem may be caused by software drivers that are called when the hard drive starts up. – This is usually caused by loading a good reliable device driver without proper hardware connected and running.

ibm ps/2 error 162

This mmarketing comes from favourite updates and PC repairs.The list is an arbitrary compilation from various sources, IBMTechnical, including IBM reference guides and hardware maintenance tasks.instructions.

What are the common errors on the PS/2 system board?

PS/2 motherboard; Parity Check Error 111 112 ps/2 Storage Adapter 113 PS/2 MicroChannel Arbitration PS/2 MicroChannel PS/2 Arbitration 114 External ROM Checksum Error 115 Cache Parity Error, ROM Checksum Error, or DMA 116 Read/Write System Board Connector 118 System board parity or L2 cache error on previous power up 119

01x Unspecified error problems

ibm ps/2 error 162

02x power failure
1xx motherboard error  Online system board error; interrupt error  motherboard error 102; timer error  103 motherboard error; Timer interrupt error  motherboard error 104; Protected Variant Error  105 motherboard error; Absolutely not accepted last command 8042  106 motherboard error; convert logic test  107 motherboard error; NMI hot abort test  one hundred and eight system board failures; Temporary tire test  109 motherboard error; Select error memory  110 PS/2 motherboard error; parity error  one hundred and eleven ps/2 memory card errors  112 MicroChannel Arbitration PS/2 Error  113 MicroChannel Arbitration PS/2 Error  121 Unexpected hardware interrupts occurred  131 Cartridge Port Short Probe ErrorPC motherboard  161 System parameters not set (run SETUP); Low battery  162 System parameters not set (run SETUP);          CMOS Checksum/Configuration Error  163 Time and date not set (run SETUP); Clock not updating  164 memory size error (run SETUP);          CMOS setting does not match memory  one hundred and sixty-five PS/2 system options were never discarded  166 PS/2 MicroChannel adapter timeout error  199 User-specified package INSTALLED DEVICES is invalid
 2xx memory (RAM) error  201 Memory check failed, showing error property         Hexadecimal  202 Memory address error, address grooves 00-15  203 Memory address error, address lines 16-23  two hundred and fifteen ps/2 motherboard detection errors 216 PS/2 Motherboard Memory Error
3xx keyboard error  301 Keyboard not responding when trying to reset software or freezes            declared incompetent. If a square key was found,            The scan code for obtaining the key is displayed in hexadecimal format.  302 Lock  Processor key locked  303 Keyboard or CPU error  304 Keyboard or system block error; Keyboard clock  305 PS/2 keyboard fuse error (on system board)
Monochrome display adapter (MDA) 4xx error  4xx PS/2 motherboard parallel port error  401 Internal memory monochrome test, horizontal sync frequency test,            or video presentation test failed  401 PS/2 motherboard parallel fan error  408 Display attribute error in user list  416 User-specified symbol configuration error  424 User requested 80x25 mode error  432 Parallel port test error; blue and red video adapter
 Color graphics adapter 5xx (CGA) error  501 CGA memory test, horizontal sync frequency test, or it could be video          trial error 508 User-Specified Function Attribute Error  516 User-specified character error set 524 Implicit user error in 80x25 mode  532 User-specified error in 40x25 mode  540 User recommended errorBox in graphics mode 320x200  548 User-specified error in graphics method 640 x 200
6xx drive/adapter error 601 The floppy drive/adapter power-on self-test failed.  drive test error 602; Invalid disk boot record  606 "manage alternate lines" function failed; drive error 607 disk is assembly protected; drive error 608 invalid command; drive error 610 disk initialization error; Bad double sided  611 Timeout; drive error 612 Controller chip failure  613 Invalid direct memory access; drive error 614 Invalid direct memory access; crossed the border  615 Wrong index synchronization; drive error 616 drive speed error 621 bad searches; generate errors  622 Invalid cyclic redundancy check; drive error 623 Record not found; drive error 624 Invalid address tag; drive error 625 Controller chip failure; look for flaws  626 Error comparing disk data

What does error 161 and 163 mean on a floppy disk?

Error 161, 163, drive not working. If a person receives a boot error Et 161 163 followed by a prompt to press the F1 keys, the CMOS battery will run out and need to be replaced. POST and 161 dilemmas 163 If ​​you boot anyway because you press You f1, you will find that floppy drives cannot read floppy disks.

Previous post Comment Réparer Le Système D’exploitation PE Builder Introuvable ?
Next post Risolto: Come Dovrebbe Essere Un Bug Inaccessibile